Sandbox
From LEAP
| LC Column Switching & Regeneration |
| Application Type | |
| SPECIAL | |
| Application ID | |
| M-001 | |
| Description | |
| LC Column Switching & Regeneration. |
| Key Benefits |
| Saving of Reagent time (Back cut) |
| Increase throughput at little cost |
| Control is all within Analyst Software |
| Compliance not affected |
| GLP Compliant |
| Restrictions |
| Cannot do "Look Ahead" |
| Injections are not staggered |
| Peaks of interest must come off early |
| Columns may perform slightly different on alternating samples |
| Quick Overview | ||||||
| Code | Application | Control SW | Key Hardware | Key Benefits | Restrictions | GLP |
|---|---|---|---|---|---|---|
| M-001 | Column switching with parallel regeneration Provides shorter cycle times by regenerating columns during next analytical run | Analyst with ICC-CE | PAL 6 port injection valve 10 port Valve Gradient Pump and Regeneration pump | Saving of regeneration time(Back Cut) Increase throughput at little cost Control is all within Analyst Compliance is not affected | Can not do "Look Ahead" Injections are not staggered Peaks of interest must come of early Columns may perform slightly differently on alternating samples | Yes |
PRINT Function for Page
For other cost/time saving measures consider:
- LEAP offers multiple choices of Valve Self Wash Stations to aid in cleaning the valve [1]
- Dual Channel Serial Injection with Front Cut (M-002) using Analyst and ICC-CE [2]
- Dual Channel Parallel Injection (M-003) using Cycle Composer Software and Analyst [3]
- “Look Ahead”, sample prep before injection (M-004) using LEAP Shell Software [4]
- Dual Channel Parallel Injection (M-005) using LEAP Shell software [5]
- LEAP Shell Software and application for custom injections and scheduling [6]
www.leaptec.com
www.leapwiki.com
www.leapwiki.com
Contact LEAP
For additional information about this technique please contact LEAP Technologies for detailed information
