Large Volume Dispensing
From LEAP
(→Video) |
Current revision (20:48, 8 June 2010) (view source) (→Typical applications) |
||
| (48 intermediate revisions not shown.) | |||
| Line 6: | Line 6: | ||
|description = Accurate dispensing of solvents at high flow rates | |description = Accurate dispensing of solvents at high flow rates | ||
}} | }} | ||
| - | + | {{logo}} | |
| - | + | ||
=== Overview === | === Overview === | ||
| - | There are | + | There are currently multiple [http://www.leaptec.com/ LEAP Technologies] preferred options on the [http://leapwiki.com/mediawiki/index.php?title=Category:PAL PAL] for delivery of large volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy. In each case these pumps can dispense liquid either through PAL side-port syringe, or using the LEAP "Dispense Tool" accessory. The advantage of the latter is that it permits larger flow rates and includes a venting channel to avoid over pressurization in the case of filling sealed vessels. A PAL controlled selector valve can supply multiple reagents thru the same dispense port. |
=== Common Uses === | === Common Uses === | ||
| Line 17: | Line 16: | ||
* Dilutions | * Dilutions | ||
| - | * | + | * [http://www.leapwiki.com/mediawiki/index.php?title=Category:Derivatization Derivatization] |
* Sample spiking | * Sample spiking | ||
* Standard additions | * Standard additions | ||
| + | |||
| + | {{logo}} | ||
---- | ---- | ||
| - | |||
| - | |||
| + | === Dilutor Accessory === | ||
| + | Can feed a solvent through the injection syringe into sample plates or vials | ||
| + | <br> | ||
| + | There are multiple options on the PAL for delivery of volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy. | ||
| + | |||
| + | Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)<br> | ||
| + | Flow Rate Range: 10μl/min - 300μl/min<br> | ||
| + | Wetted parts: All liquids compatible with borosilicate glass, PTFE, Kel-F, FEP | ||
| + | <br> | ||
| + | ''' Notes ''' | ||
| + | * Requires the addition of a custom macro or cycle for dispensing/diluting applications | ||
| + | * Can be used with any of the PAL side port syringes or with the DISPENSE Tool | ||
| + | * Is not supported by the on board PAL cycles | ||
| + | * Requires an open AUX Port on the PAL | ||
| + | * Requires PAL firmware 2.3 or higher | ||
Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)<br> | Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)<br> | ||
Flow Rate Range: 10μl/min - 300μl/min<br> | Flow Rate Range: 10μl/min - 300μl/min<br> | ||
| Line 32: | Line 46: | ||
* Requires the addition of a custom macro or cycle for dispensing/diluting applications | * Requires the addition of a custom macro or cycle for dispensing/diluting applications | ||
* Can be used with any of the PAL side port syringes or with the DISPENSE Tool | * Can be used with any of the PAL side port syringes or with the DISPENSE Tool | ||
| - | * Is not supported by the | + | * Is not supported by the on board PAL cycles |
* Requires an open AUX Port on the PAL | * Requires an open AUX Port on the PAL | ||
* Requires PAL firmware 2.3 or higher | * Requires PAL firmware 2.3 or higher | ||
| Line 38: | Line 52: | ||
<gallery> | <gallery> | ||
| - | Image:DISP_TOOL_Dilutor.png | | + | Image:DISP_TOOL_Dilutor.png | Dilutor with DISPTool |
| - | Image:Dilutor.png | | + | Image:Dilutor.png | Dilutor on PAL |
</gallery> | </gallery> | ||
| + | {{logo}} | ||
---- | ---- | ||
| - | === | + | === Mini Pump Series Accessory === |
| - | The | + | The Mini Pump liquid handling pump is a syringe-free pump capable of delivering a bidirectional flow to six orders of magnitude. The Mini Pump is a positive displacement pump, which means that it is self-priming and tolerant of any gas which may find its way into the fluid lines. Since there is no separate fill cycle, the pump can be operated continuously, and volumetric capacity is limited only by time. |
| + | |||
| + | The flow range can be from less than 1 ul to over 25 mL/min | ||
''' Notes ''' | ''' Notes ''' | ||
| Line 54: | Line 71: | ||
<gallery> | <gallery> | ||
| - | Image:Vpump.png | | + | Image:Vpump.png | Mini Pump |
Image:Pump_with_selector_valve.png | Pump on PAL | Image:Pump_with_selector_valve.png | Pump on PAL | ||
</gallery> | </gallery> | ||
| - | + | {{logo}} | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
---- | ---- | ||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
=== Side Port Syringe Accessory === | === Side Port Syringe Accessory === | ||
| Line 121: | Line 94: | ||
</gallery> | </gallery> | ||
| - | + | {{logo}} | |
---- | ---- | ||
=== DISPTool Accessory === | === DISPTool Accessory === | ||
| Line 131: | Line 104: | ||
* 19ga needle with built in vent | * 19ga needle with built in vent | ||
* May allow single rail to have functionality of dual rail system | * May allow single rail to have functionality of dual rail system | ||
| - | * Can be used with the Dilutor, | + | * Can be used with the Dilutor, Mini Pump, or LEAP SDS |
''' Requirements/Limitations ''' | ''' Requirements/Limitations ''' | ||
* Requires some additional rail space for DISPTool parking location | * Requires some additional rail space for DISPTool parking location | ||
* Requires custom firmware | * Requires custom firmware | ||
| - | |||
<gallery> | <gallery> | ||
| Line 144: | Line 116: | ||
</gallery> | </gallery> | ||
| - | == Video == | + | === Video === |
| - | + | [[Image:Movie Icon.png|40px]] [[:media:DISPTool.wmv| Dispense Tool movement]] ''Uses Windows Media Player to view'' | |
| - | Dispense tool in action on youtube [http://www.youtube.com/ | + | [[Image:Movie Icon.png|40px]] [http://www.youtube.com/watch?v=T1K_zCkPkIE Dispense tool in action on youtube ] |
| + | |||
| + | [[Image:Movie Icon.png|40px]] [http://www.youtube.com/user/LEAPTechnologies Various PAL's in action on YouTube] | ||
---- | ---- | ||
| - | |||
| + | === PRINT Function for Page === | ||
| - | + | ||
| + | [[image:Download Icon.png|40px]] [[:Image:Large_Volume_Dispensing_Overview_20090227.pdf | PDF of this page formatted for printing]] | ||
---- | ---- | ||
| + | {{logo}} | ||
| + | |||
| + | LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis. <br> | ||
| + | LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions. | ||
| + | |||
| + | === Contact LEAP === | ||
| + | {{contact|topic=LEAP and the PAL Platform}} | ||
| + | [[Category:Glossary]] | ||
| + | [[Category:Accessories]] | ||
Current revision
| Large Volume Dispensing |
| Application Type | |
| SPECIAL | |
| Application ID | |
| Description | |
| Accurate dispensing of solvents at high flow rates |
Contents |
Overview
There are currently multiple LEAP Technologies preferred options on the PAL for delivery of large volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy. In each case these pumps can dispense liquid either through PAL side-port syringe, or using the LEAP "Dispense Tool" accessory. The advantage of the latter is that it permits larger flow rates and includes a venting channel to avoid over pressurization in the case of filling sealed vessels. A PAL controlled selector valve can supply multiple reagents thru the same dispense port.
Common Uses
- Dispense liquid prior sample injection and combines the "add liquid" and "inject" steps without user intervention or syringe change.
Typical applications
- Dilutions
- Derivatization
- Sample spiking
- Standard additions
Dilutor Accessory
Can feed a solvent through the injection syringe into sample plates or vials
There are multiple options on the PAL for delivery of volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy.
Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)
Flow Rate Range: 10μl/min - 300μl/min
Wetted parts: All liquids compatible with borosilicate glass, PTFE, Kel-F, FEP
Notes
- Requires the addition of a custom macro or cycle for dispensing/diluting applications
- Can be used with any of the PAL side port syringes or with the DISPENSE Tool
- Is not supported by the on board PAL cycles
- Requires an open AUX Port on the PAL
- Requires PAL firmware 2.3 or higher
Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)
Flow Rate Range: 10μl/min - 300μl/min
Wetted parts: All liquids compatible with borosilicate glass, PTFE, Kel-F, FEP
Notes
- Requires the addition of a custom macro or cycle for dispensing/diluting applications
- Can be used with any of the PAL side port syringes or with the DISPENSE Tool
- Is not supported by the on board PAL cycles
- Requires an open AUX Port on the PAL
- Requires PAL firmware 2.3 or higher
 Dilutor with DISPTool |
 Dilutor on PAL |
Mini Pump Series Accessory
The Mini Pump liquid handling pump is a syringe-free pump capable of delivering a bidirectional flow to six orders of magnitude. The Mini Pump is a positive displacement pump, which means that it is self-priming and tolerant of any gas which may find its way into the fluid lines. Since there is no separate fill cycle, the pump can be operated continuously, and volumetric capacity is limited only by time.
The flow range can be from less than 1 ul to over 25 mL/min
Notes
- Requires LEAP Shell Software for control.
- Can be used with any of the PAL side port syringes or with the DISPENSE Tool
- Is not supported by the onboard PAL cycles
 Mini Pump |
Pump on PAL |
Side Port Syringe Accessory
Main Features
- Can be used to dispense liquid prior sample injection
- Combines the "add liquid" and "inject" steps without user intervention or syringe change
- Variety of sizes available: 20µl or 80µl for LC applications and 20µl or 80µl for GC applications
 Side Port Syringe in action |
 Side Port on PAL |
Side Port on PAL |
DISPTool Accessory
Main Features
- Can be used to dispense bulk liquids without using the injection syringe
- The tool is magnetically picked up by the PAL and moved to the vial or plate only when needed
- Able to pierce a septa with an adjustable needle penetration
- 19ga needle with built in vent
- May allow single rail to have functionality of dual rail system
- Can be used with the Dilutor, Mini Pump, or LEAP SDS
Requirements/Limitations
- Requires some additional rail space for DISPTool parking location
- Requires custom firmware
|
 |
 |
Video
Dispense Tool movement Uses Windows Media Player to view
Dispense tool in action on youtube
Various PAL's in action on YouTube
PRINT Function for Page
PDF of this page formatted for printing
LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis.
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.
Contact LEAP
 Contact LEAP
For additional information about LEAP and the PAL Platform, please contact LEAP Technologies. |
