Valve Washing

From LEAP

(Difference between revisions)
Jump to: navigation, search
Current revision (20:40, 28 January 2010) (view source)
(Publications)
 
(27 intermediate revisions not shown.)
Line 1: Line 1:
{{LSApp
{{LSApp
   |name        = Washing LC Valve
   |name        = Washing LC Valve
-
   |image      = VSW.png
+
   |image      = HTC-xt.png
   |type        = Washing LC Valve
   |type        = Washing LC Valve
   |id          = Washing LC Valve
   |id          = Washing LC Valve
   |description = Accessory Showcase
   |description = Accessory Showcase
}}
}}
 +
{{logo}}
 +
Flushing or "washing" the syringe and valve can be essential. The selection of solvents and the number of washes can be of paramount importance. Although it may seem obvious, it is worth stating that washing with ineffective solvent(s) is useless. There are many factors that will influence the effectiveness of the rinse, strength and polarity among them, but there are no hard and fast rules that apply to every case, so the end-user/chemist must be sure to choose solvents that will get the job done. The valve material and syringe type can also influence carry-over.
 +
<br>
 +
Here are some options LEAP offers for washing the valve including the latest the DLW
-
 
+
=== LEAP's Solutions to Washing Valve  ===
-
Flushing or "washing" the syringe and valve can be essential. The selection of solvents and the number of washes can be of paramount importance. Although it may seem obvious, it is worth stating that washing with ineffective solvent(s) is useless. There are many factors that will influence the effectiveness of the rinse, strength and polarity among them, but there are no hard and fast rules that apply to every case, so the end-user/chemist must be sure to choose solvents that will get the job done. Here are some options LEAP offers for washing the valve.
+
<br>
-
 
+
*[[DLW (Dynamic Load and Wash)]]
-
 
+
-
=== Solutions to Washing Valve  ===
+
-
 
+
-
*[[Valve Self Washing II]]
+
*[[Valve Active Self Washing]]
*[[Valve Active Self Washing]]
Line 23: Line 23:
=== Publications ===
=== Publications ===
-
*[[:image:Steptoassessandremedyautosamplercarry-over.pdf | Steps to Assess and Remedy Autosampler Carry-Over]]
+
[[image: Info icon.png|40px]] [[:media:Steptoassessandremedyautosamplercarry-over.pdf | Steps to Assess and Remedy Autosampler Carry-Over]]
-
*[http://www.leaptec.com/chromatography/carry-over-prevention-and-abatement.php Carry-Over Prevention and Abatement]
+
[[image: Info icon.png|40px]] [[:media:Carryover_Primer_Rev_1_FinalDraft.pdf | Carry-Over Prevention and Abatement]]
-
*[http://chromatographyonline.findanalytichem.com/lcgc/data/articlestandard/lcgc/482001/3016/article.pdf LCGC Article about Autosampler Carryover ]
+
[[image: Info icon.png|40px]] [http://chromatographyonline.findanalytichem.com/lcgc/data/articlestandard/lcgc/482001/3016/article.pdf LCGC Article about Autosampler Carryover ]
 +
[[image: Info icon.png|40px]] [http://chromatographyonline.findanalytichem.com/lcgc/Column:+LC+Troubleshooting/Autosampler-Carryover/ArticleStandard/Article/detail/377221 LCGC Article about why blank is never clean]
 +
=== Accessories for the PAL ===
 +
[[image:Accessories_Icon.png|40px]] [http://www.leapwiki.com/mediawiki/index.php?title=Category:Accessories Other Accessories for PAL Robots]
-
-----
+
[[image:Accessories_Icon.png|40px]] [http://www.leapwiki.com/mediawiki/index.php?title=Category:Fast_Wash_Station Fast Wash Station]
-
[[Image:LEAP Logo.png|frame|www.leaptec.com<br>www.leapwiki.com]]
+
----
 +
{{logo}}
 +
 
 +
LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis. <br>
 +
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.
=== Contact LEAP ===
=== Contact LEAP ===
 +
{{contact|topic=LEAP and the PAL Platform}}
 +
<br><br>
 +
'''Keywords:''' Flushing,washing,Liquid Chromatography, HPLC, syringe, valve, cleaning,selection of solvents, sticky moieties, number of washes, ineffective solvents, factors influencing, rinse, strength, polarity, among them, CTC, PAL , Autosampler, Robot, carryover, Change hardware-chemistry combination, carry over, dual wash stations for minimum carryover without increasing the total analysis cycle time, carry-over, LEAP,Carryover is caused by the residual analyte from injection of the previous sample, LC-MS,reduce carryover, ultimate solution to reduce carry-over to the minimum,LEAP, bio-compatible valve,sample carryover,bioanalytical methods,  sticky compounds, wash mixtures, wash sequence, LC Clean cycles, injection valve switching, macros, blank, needle type, near zero, two solvents, point style needle, L-Mark, X-Type, relative carryover (RC),utilizing PEEK®, PAEK® and Valcon E materials in the injection valve, Reduce your carryover by upgrading. HTS PAL-xt, HTC PAL-xt, DLW,industry-standard HTC PAL autosampler from CTC Analytics,reduce carryover CTC LEAP PAL,tools to attack carry-over problems
-
For additional information about this technique please contact LEAP Technologies for detailed information
 
-
* [http://www.leaptec.com/contact-us.php Contact the LEAP office]
 
-
 
-
----
 
-
<br><br>
 
[[Category:Accessories]]
[[Category:Accessories]]
 +
[[Category:Glossary]]

Current revision

Washing LC Valve
Application Type
  Washing LC Valve
Application ID
  Washing LC Valve
Description
  Accessory Showcase
 ↳ leaptec.com  ↳ leapwiki.com

Flushing or "washing" the syringe and valve can be essential. The selection of solvents and the number of washes can be of paramount importance. Although it may seem obvious, it is worth stating that washing with ineffective solvent(s) is useless. There are many factors that will influence the effectiveness of the rinse, strength and polarity among them, but there are no hard and fast rules that apply to every case, so the end-user/chemist must be sure to choose solvents that will get the job done. The valve material and syringe type can also influence carry-over.
Here are some options LEAP offers for washing the valve including the latest the DLW

Contents

LEAP's Solutions to Washing Valve




Publications

Steps to Assess and Remedy Autosampler Carry-Over

Carry-Over Prevention and Abatement

LCGC Article about Autosampler Carryover

LCGC Article about why blank is never clean

Accessories for the PAL

Other Accessories for PAL Robots

Fast Wash Station


 ↳ leaptec.com  ↳ leapwiki.com

LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis.
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.

Contact LEAP

Contact LEAP

For additional information about LEAP and the PAL Platform, please contact LEAP Technologies.



Keywords: Flushing,washing,Liquid Chromatography, HPLC, syringe, valve, cleaning,selection of solvents, sticky moieties, number of washes, ineffective solvents, factors influencing, rinse, strength, polarity, among them, CTC, PAL , Autosampler, Robot, carryover, Change hardware-chemistry combination, carry over, dual wash stations for minimum carryover without increasing the total analysis cycle time, carry-over, LEAP,Carryover is caused by the residual analyte from injection of the previous sample, LC-MS,reduce carryover, ultimate solution to reduce carry-over to the minimum,LEAP, bio-compatible valve,sample carryover,bioanalytical methods, sticky compounds, wash mixtures, wash sequence, LC Clean cycles, injection valve switching, macros, blank, needle type, near zero, two solvents, point style needle, L-Mark, X-Type, relative carryover (RC),utilizing PEEK®, PAEK® and Valcon E materials in the injection valve, Reduce your carryover by upgrading. HTS PAL-xt, HTC PAL-xt, DLW,industry-standard HTC PAL autosampler from CTC Analytics,reduce carryover CTC LEAP PAL,tools to attack carry-over problems

Personal tools