Valve Switching Modules

From LEAP

(Difference between revisions)
Jump to: navigation, search
Current revision (17:16, 18 November 2009) (view source)
 
(6 intermediate revisions not shown.)
Line 7: Line 7:
}}
}}
<br>
<br>
-
'''Valve Switching Modules''' for the PAL consist of 2 or 3 individually controlled multi-position valve drives arranged in a vertical stack. The top valve acts usually as injection valve, while the remaining one or two valves are used as switching valves. Typical applications are pre-column SPE, pre-column cleanup, sample desalting, etc. For increased sample throughput the accessory can be used for time staggered "heart-cuts" of two independent gradient systems. Important chromatogram parts only reach the detector just in time using a selector valve, while the front- and end-cut goes to waste. The compact valve module arrangement results in a space saving setup with very short connection lines. The modules are compatible either with 4- 6- 8- or 10-port valves and can be mixed on the same valve drive module.
+
'''Valve Switching Modules''' for the PAL consist of 2 or 3 individually controlled multi-position valve drives arranged in a vertical stack. The top valve acts usually as injection valve, while the remaining one or two valves are used as switching valves. [http://leapwiki.com/mediawiki/index.php?title=LC_Multi-Valve_Applications Typical applications] are pre-column SPE, pre-column cleanup, sample desalting, etc. For increased sample throughput the accessory can be used for time staggered [http://leapwiki.com/mediawiki/index.php?title=Category:Heart_Cut "heart-cuts"] of two independent gradient systems. Important chromatogram parts only reach the detector just in time using a selector valve, while the [http://www.leapwiki.com/mediawiki/index.php?title=Category:Frontcut frontcut] and [http://www.leapwiki.com/mediawiki/index.php?title=Category:Backcut backcut]goes to waste. The compact valve module arrangement results in a space saving setup with very short connection lines. The modules are compatible either with 4- 6- 8- or 10-port valves and can be mixed on the same valve drive module.
-
* Pre-column sample cleanup, desalting or pre-column SPE[http://leapwiki.com/mediawiki/index.php?title=In-line_Sample_Concentration_or_Filtration]
+
* Pre-column sample cleanup, desalting or pre-column [http://leapwiki.com/mediawiki/index.php?title=In-line_Sample_Concentration_or_Filtration SPE]
-
* Alternate column regeneration[http://www.leapwiki.com/mediawiki/index.php?title=M-001_Dual_Channel_Serial_Injection_-_Analyst_with_ICC-CE]
+
* [http://www.leapwiki.com/mediawiki/index.php?title=M-001_Dual_Channel_Serial_Injection_-_Analyst_with_ICC-CE Alternate column regeneration]
-
* 4 - 6 - 8 - or 10 - port valves individually arranged in a vertical stack[http://leapwiki.com/mediawiki/index.php?title=LC_Multi-Valve_Applications]
+
* 4 - 6 - 8 - or 10 - port valves individually arranged in a [http://leapwiki.com/mediawiki/index.php?title=LC_Multi-Valve_Applications vertical stack]
[[Image:Valves.png‎|600px|thumb|center|LEAP CTC Valve Switching Modules]]
[[Image:Valves.png‎|600px|thumb|center|LEAP CTC Valve Switching Modules]]
-
[http://leapwiki.com/mediawiki/index.php?title=LC_Multi-Valve_Applications LC Multi Valve Applications]
+
[http://leapwiki.com/mediawiki/index.php?title=LC_Multi-Valve_Applications LC Multi Valve Applications by LEAP Technologies]
<br>
<br>
----
----

Current revision

Ceramic
Application Type
 
Application ID
  Valve Switching
Description
  Valve Switching Modules


Valve Switching Modules for the PAL consist of 2 or 3 individually controlled multi-position valve drives arranged in a vertical stack. The top valve acts usually as injection valve, while the remaining one or two valves are used as switching valves. Typical applications are pre-column SPE, pre-column cleanup, sample desalting, etc. For increased sample throughput the accessory can be used for time staggered "heart-cuts" of two independent gradient systems. Important chromatogram parts only reach the detector just in time using a selector valve, while the frontcut and backcutgoes to waste. The compact valve module arrangement results in a space saving setup with very short connection lines. The modules are compatible either with 4- 6- 8- or 10-port valves and can be mixed on the same valve drive module.

LEAP CTC Valve Switching Modules
LEAP CTC Valve Switching Modules

LC Multi Valve Applications by LEAP Technologies


LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.

 ↳ leaptec.com  ↳ leapwiki.com

Contact LEAP

Contact LEAP

For additional information about LEAP and the PAL Platform, please contact LEAP Technologies.

Personal tools