Valve Self Washing II

From LEAP

(Difference between revisions)
Jump to: navigation, search
(Contact LEAP)
Line 53: Line 53:
== Contact LEAP ==
== Contact LEAP ==
-
* [http://www.leaptec.com/ LEAP Technologies, Inc.]
+
* [http://www.leaptec.com/contact-us.php Contact the LEAP office]
[[Category:Valve Washing]]
[[Category:Valve Washing]]
[[Category:LC Inject]]
[[Category:LC Inject]]

Revision as of 14:16, 21 April 2009

Valve Self-Washing System – II
Application Type
  Washing LC Valve
Application ID
  Valve Self-Washing System – II
Description
  Accessory Showcase

Contents

Main Features

  • Increased Throughput by simultaneous washing of injection syringe and injection valve
  • 4 Wash Solvents can be used to wash the valve
  • 9 Program Steps to wash with the 4 wash solvents in any order
  • Software Interface SDS Launchpad
  • Save/Load Methods
  • Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
  • Contact Closure Triggered
  • Runs stored wash routine
  • Washes independent of injection syringe
  • Can increase syringe life
  • Compatible with all PAL Drivers

Performance Specifications

  • Maximum flowrate 6mL/min in increments of 0.1mL/min
  • Flowrate accuracy ± 10%
  • Maximum dispensed volume 999mL
  • Volumetric accuracy ± 5%
  • Maximum pressure 50PSIG
  • Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds

Requirements/Limitations

  • Through-loop washes only for injection loop volumes > 20uL
  • Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
  • Use of Polypropylene compatible solvents

Screenshots

Other Reference material

PRINT Function for Page

Contact LEAP

Personal tools