|
|
| Line 7: |
Line 7: |
| | }} | | }} |
| | | | |
| - | === Main Features === | + | === Coming Soon === |
| - | * Increased Throughput by simultaneous washing of injection syringe and injection valve
| + | |
| - | * 4 Wash Solvents can be used to wash the valve
| + | |
| - | * 9 Program Steps to wash with the 4 wash solvents in any order
| + | |
| - | * Software Interface SDS Launchpad
| + | |
| - | * Save/Load Methods
| + | |
| - | * Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
| + | |
| - | * Contact Closure Triggered
| + | |
| - | * Compatible with all PAL Drivers
| + | |
| - | | + | |
| - | === Performance Specifications ===
| + | |
| - | * Maximum flowrate 6mL/min in increments of 0.1mL/min
| + | |
| - | * Flowrate accuracy ± 10%
| + | |
| - | * Maximum dispensed volume 999mL
| + | |
| - | * Volumetric accuracy ± 5%
| + | |
| - | * Maximum pressure 50PSIG
| + | |
| - | * Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds
| + | |
| - | | + | |
| - | === Requirements/Limitations ===
| + | |
| - | * Through-loop washes only for injecction loop volumes > 20uL
| + | |
| - | * Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
| + | |
| - | * Use of Polypropylene compatible solvents
| + | |
| - | | + | |
| - | | + | |
| - | == Screenshots ==
| + | |
| - | | + | |
| - | <gallery>
| + | |
| - | Image:LaunchPAD1.png | Launch Pad Main Screen
| + | |
| - | Image:LaunchPAD2.png | Launch Pad Actions Screen
| + | |
| - | Image:LaunchPAD3.png | Launch Pad Load Method Screen
| + | |
| - | Image:LaunchPAD4.png | Launch Pad Log Screen
| + | |
| - | </gallery>
| + | |
| - | | + | |
| - | == Other Reference material ==
| + | |
| - | | + | |
| - | *[[:Image:VSW vs Active Wash Powerpoint.pps | Comparison of VSW and Active Wash]]
| + | |
| - | | + | |
| - | | + | |
| - | [[Category:Valve Washing]]
| + | |
| - | [[Category:LC Inject]]
| + | |
