Training
From LEAP
| Line 35: | Line 35: | ||
''There is AUDIO so make sure your speakers are on! '' | ''There is AUDIO so make sure your speakers are on! '' | ||
--- | --- | ||
| + | |||
| + | |||
| + | === Rinsing the Wash Station and Tubing with Solvent after refilling Solvent Reservoir ==== | ||
| + | • To replenish the Wash solvent, close the stopcock at the base of the Wash Bottle | ||
| + | • Disconnect the tube at the black nut that goes into the white stopcock at the base of the bottle | ||
| + | • Rinse the bottle with fresh solvent and drain some solvent out through the stopcock | ||
| + | • Place the Wash bottle back into position, re-connect its tube, and open the stopcock | ||
| + | • Menu (F1) | ||
| + | • Utilities <enter> | ||
| + | • Wash Station <enter> | ||
| + | • Select desired wash station <enter> | ||
| + | • Press Act Valve (F2) to open the valve (located in the solenoid under the Wash Station) | ||
| + | • Rinse the tube until all the bubbles in it are flushed out (several seconds) | ||
| + | • Press Deact Valve (F2) to close the solenoid valve | ||
| + | • When F2 reads Act Valve, the solenoid is closed | ||
| + | • When reads Deact Valve, the solenoid is open | ||
| + | • Home | ||
| + | |||
| + | |||
LEAP offers installation and familiarization training with every new system. The twelve month warranty includes unlimited telephone support and module exchange programs. Extended warranties include annual preventative maintenance in addition to telephone support and module exchange programs. | LEAP offers installation and familiarization training with every new system. The twelve month warranty includes unlimited telephone support and module exchange programs. Extended warranties include annual preventative maintenance in addition to telephone support and module exchange programs. | ||
Revision as of 18:45, 2 July 2009
| Training Videos |
| Application Type | |
| Application ID | |
| Description | |
| Training Videos |
Training Videos of PAL
MicroNMR a partner of LEAP Technologies has put together some basic Training Videos for the PAL robot
A special thanks to MicroNMR for providing the videos on their website for all to access
http://www.micronmr.com/training_videos.html
Videos
Changing the Syringe of the PAL [1]
Changing the Needle Sleeve of the PAL [2]
Changing the Injection Depth at Valve of the PAL [3]
Manual Injection of the PAL [4]
Calibration of 96 well microtiter plate of the PAL [5]
You will be leaving the LEAPWiki and going to the MicroNMR Website. To return just press the back button in your browser window. The videos are FLASH videos and should be easily viewed within any standard web browser. Simply click on one of the link to play that video. If you are having trouble viewing the videos you may need to install the Flash Plug-in from the Adobe website (www.adobe.com). There is AUDIO so make sure your speakers are on! ---
Rinsing the Wash Station and Tubing with Solvent after refilling Solvent Reservoir =
• To replenish the Wash solvent, close the stopcock at the base of the Wash Bottle • Disconnect the tube at the black nut that goes into the white stopcock at the base of the bottle • Rinse the bottle with fresh solvent and drain some solvent out through the stopcock • Place the Wash bottle back into position, re-connect its tube, and open the stopcock • Menu (F1) • Utilities <enter> • Wash Station <enter> • Select desired wash station <enter> • Press Act Valve (F2) to open the valve (located in the solenoid under the Wash Station) • Rinse the tube until all the bubbles in it are flushed out (several seconds) • Press Deact Valve (F2) to close the solenoid valve • When F2 reads Act Valve, the solenoid is closed • When reads Deact Valve, the solenoid is open • Home
LEAP offers installation and familiarization training with every new system. The twelve month warranty includes unlimited telephone support and module exchange programs. Extended warranties include annual preventative maintenance in addition to telephone support and module exchange programs.
For customers that want to write their own custom macros and injection cycles, LEAP offers software training at our facility in Carrboro, NC.
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.
