Solvent Delivery System

From LEAP

Revision as of 13:26, 9 June 2009 by Bpeat (Talk | contribs)
Jump to: navigation, search
Large Volume Dispensing
Application Type
  SPECIAL
Application ID
 
Description
  Accurate dispensing of solvents at high flow rates

Contents

Solvent Delivery System (SDS) Accessory

Main Features

  • 4 Solvents can be dispensed
  • 9 Program Steps allow solvents to be added in any order
  • Software Interface SDS Launchpad for loading dispense routines
  • Save/Load Methods to PC drive
  • Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
  • Contact closure triggers device to run stored dispense routine
  • Significantly extends the PAL dispenseing volume range.
  • Can be used with any PAL side port syringe or LEAP DISPENSE Tool
  • Compatible with all PAL Drivers


Performance Specifications

  • Maximum flowrate 6mL/min in increments of 0.1mL/min
  • Flowrate accuracy ± 10%
  • Maximum dispensed volume 999mL
  • Volumetric accuracy ± 5%
  • Maximum pressure 50PSIG
  • Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds

Requirements/Limitations

  • Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
  • Use of Polypropylene compatible solvents


Screenshots

Solvent Delivery System

PRINT Function for Page

PDF of this page formatted for printing

Accessories for the PAL

Other Accessories for PAL Robots



Contact LEAP

For additional information about this technique please contact LEAP Technologies for detailed information

Contact the LEAP office




Personal tools