From LEAP
(Difference between revisions)
|
|
Line 8: |
Line 8: |
| | | |
| === Overview === | | === Overview === |
- | This configuration allows the front cut of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput. This is run directly from within '''Analyst''' using a Custom LEAP Cycle (requires ICC-CE software).
| |
| | | |
- | There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.<br> All three valves must be controlled by the custom cycle. LEAP can not control the MS Selector valve as part of the cycle.
| + | Coming soon |
- | | + | |
- | | + | |
- | [[Image:key_Benefits2.png]]
| + | |
- | | + | |
- | | + | |
- | | + | |
- | [[Image:Restrictions.png]]
| + | |
- | | + | |
- | | + | |
- | [[Image:Table M-001.png]]
| + | |
- | | + | |
- | | + | |
- | === Power Point of Regeneration ===
| + | |
- | *[[:Image:Column_Regeneration.pps| Valve Power Point]]
| + | |
- | | + | |
- | | + | |
- | === Contact LEAP ===
| + | |
- | | + | |
- | * [http://www.leaptec.com/ LEAP Technologies, Inc.]
| + | |
- | | + | |
- | Keyword: Analyst Software, ICC-CE, PAL, TRIO Valve, 10 port valve, selector valve, injector valve, gradient pump, regeneration pump,back cut, peaks of interest, GLP
| + | |
Revision as of 16:43, 1 April 2009
| Dual Channel Serial Injection with Front Cut
|
Application Type
|
SPECIAL
|
Application ID
|
M-002
|
Description
|
High throughput where one column is regenerating while the other is performing analytical separation. An additional valve allows solvent front to be cut to waste.
|
Overview
Coming soon