M-002 Dual Channel Serial Injection with front cut - Analyst with ICC-CE
From LEAP
(Difference between revisions)
Line 1: | Line 1: | ||
{{LSApp | {{LSApp | ||
|name = Dual Channel Serial Injection with front cut | |name = Dual Channel Serial Injection with front cut | ||
- | |image = | + | |image = M-Fab_Photo1.png |
|type = '''SPECIAL''' | |type = '''SPECIAL''' | ||
|id = M-001 | |id = M-001 | ||
Line 11: | Line 11: | ||
There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.<br> Both valves must be controlled by the custom cycle. LEAP can not control the MS Selector valve as part of the cycle. | There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.<br> Both valves must be controlled by the custom cycle. LEAP can not control the MS Selector valve as part of the cycle. | ||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- |
Revision as of 14:00, 20 February 2009
Overview
This configuration allows the regeneration of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput. This can be run directly from within Analyst using a custom Cycle (requires ICC-CE). With the addition of a selector valve, the solvent fron can be cut to waste.
There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.
Both valves must be controlled by the custom cycle. LEAP can not control the MS Selector valve as part of the cycle.