M-001 Dual Channel Serial Injection - Analyst with ICC-CE
From LEAP
(→Power Point of Regeneration) |
(→PRINT Function for Page) |
||
| Line 30: | Line 30: | ||
== PRINT Function for Page == | == PRINT Function for Page == | ||
| - | *[[:Image: | + | *[[:Image:M001_Dual_Column_with_Regeneration_Estimate_20090401.pdf | PDF of this page formatted for printing]] |
---- | ---- | ||
Revision as of 16:33, 1 April 2009
| LC Column Switching & Regeneration |
| Application Type | |
| SPECIAL | |
| Application ID | |
| M-001 | |
| Description | |
| LC Column Switching & Regeneration. |
Contents |
Overview
This configuration allows the regeneration of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput. This is run directly from within Analyst using a Standard LEAP Cycle (requires ICC-CE software).
There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.
Both valves must be controlled by the Standard LEAP cycle. LEAP can not control the MS Selector valve as part of the cycle.
Power Point of Regeneration
PRINT Function for Page
Contact LEAP
Keyword: Analyst Software, ICC-CE, PAL, 10 port valve, selector valve, injector valve, gradient pump, regeneration pump,back cut, peaks of interest, GLP
