Large Volume Dispensing
From LEAP
(→Valco M Series pumps) |
(→Solvent Delivery System (SDS)) |
||
| Line 62: | Line 62: | ||
=== Solvent Delivery System (SDS) === | === Solvent Delivery System (SDS) === | ||
| - | |||
| - | |||
| - | |||
<gallery> | <gallery> | ||
| Line 71: | Line 68: | ||
</gallery> | </gallery> | ||
| + | |||
| + | === Main Features ==== | ||
| + | * 4 Solvents can be dispensed | ||
| + | * 9 Program Steps to add solvents in any order | ||
| + | * Software Interface SDS Launchpad | ||
| + | * Save/Load Methods | ||
| + | * Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad | ||
| + | * Contact Closure Triggered | ||
| + | * Runs stored dispense routine | ||
| + | * Can be used with Side Port Syringe or DISPTool | ||
| + | * May allow single rail to have functionality of dual rail system | ||
| + | * Compatible with all PAL Drivers | ||
| + | |||
| + | |||
| + | === Performance Specifications === | ||
| + | * Maximum flowrate 6mL/min in increments of 0.1mL/min | ||
| + | * Flowrate accuracy ± 10% | ||
| + | * Maximum dispensed volume 999mL | ||
| + | * Volumetric accuracy ± 5% | ||
| + | * Maximum pressure 50PSIG | ||
| + | * Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds | ||
| + | |||
| + | === Requirements/Limitations === | ||
| + | * Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min | ||
| + | * Use of Polypropylene compatible solvents | ||
| + | |||
| + | |||
| + | == Screenshots == | ||
| + | <gallery> | ||
| + | Image:LaunchPAD1.png | Launch Pad Main Screen | ||
| + | Image:LaunchPAD2.png | Launch Pad Actions Screen | ||
| + | Image:LaunchPAD3.png | Launch Pad Load Method Screen | ||
| + | Image:LaunchPAD4.png | Launch Pad Log Screen | ||
| + | </gallery> | ||
---- | ---- | ||
Revision as of 15:29, 27 February 2009
| Large Volume Dispensing |
| Application Type | |
| SPECIAL | |
| Application ID | |
| Description | |
| Accurate Pumping of solvents at high flow rates using the Valco M50 pump and Dispense Tool |
Contents |
Overview
There are three options on the PAL for delivery of large volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy. In each case these pumps can dispense liquid either through PAL side-port syringe, or using the LEAP "Dispense Tool" accessory. The advantage of the latter is that it permits larger flow rates and includes a venting channel to avoid over pressurization in the case of filling sealed vessels.
Common Uses
- Dispense liquid prior sample injection and combines the "add liquid" and "inject" steps without user intervention or syringe change.
Typical applications
- Dilutions
- Derivatisations
- Sample spiking
- Standard additions
CTC Dilutor
Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)
Flow Rate Range: 10μl/min - 300μl/min
Wetted parts: All liquids compatible with borosilicate glass, PTFE, Kel-F, FEP
Notes
- Requires the addition of a custom macro or cycle to run the appropriate macro
- Limited to either a 20 or 80uL sample syringe size with a side port connection
- Requires an open AUX Port on the PAL
- Requires PAL firmware 2.3 or higher
- It can not be used on standalone PAL instruments
 CTC Dilutor with DISPTool |
 CTC Dilutor on PAL |
Valco M Series pumps
The patented* Cheminert® M Series liquid handling pump is a syringe-free pump capable of delivering a bidirectional flow to six orders of magnitude. The M Series is a positive displacement pump, which means that it is self-priming and tolerant of any gas which may find its way into the fluid lines. Since there is no separate fill cycle, the pump can be operated continuously, and volumetric capacity is limited only by time.
 Vici Valco Pump |
Useful links:
Valco website - description of the pump: [1]
Solvent Delivery System (SDS)
 Solvent Delivery Module |
 SDS on PAL |
Main Features =
- 4 Solvents can be dispensed
- 9 Program Steps to add solvents in any order
- Software Interface SDS Launchpad
- Save/Load Methods
- Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
- Contact Closure Triggered
- Runs stored dispense routine
- Can be used with Side Port Syringe or DISPTool
- May allow single rail to have functionality of dual rail system
- Compatible with all PAL Drivers
Performance Specifications
- Maximum flowrate 6mL/min in increments of 0.1mL/min
- Flowrate accuracy ± 10%
- Maximum dispensed volume 999mL
- Volumetric accuracy ± 5%
- Maximum pressure 50PSIG
- Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds
Requirements/Limitations
- Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
- Use of Polypropylene compatible solvents
Screenshots
 Launch Pad Main Screen |
 Launch Pad Actions Screen |
 Launch Pad Load Method Screen |
 Launch Pad Log Screen |
Useful links:
Valco website - description of the pump: [2]
