LC Column Switching and Regeneration

From LEAP

Revision as of 15:25, 12 February 2009 (view source) Bpeat (Talk | contribs) ← Older edit		Current revision (14:28, 5 November 2009) (view source) Bpeat (Talk | contribs)
(One intermediate revision not shown.)
Line 7:		Line 7:
	}}		}}
-	=== Overview ===	+	<br>
-	This configuration allows the regeneration of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput. This can be run directly from within '''Analyst''' using a custom Cycle (requires ICC-CE).	+	'''Sorry for any inconvenience '''
-	There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching. Both valves must be controlled by the custom cycle. LEAP can not control the MS Selector valve as part of the cycle.	+	Please see http://www.leapwiki.com/mediawiki/index.php?title=M-001_Dual_Channel_Serial_Injection_-_Analyst_with_ICC-CE
-		+
-		+
-	[[Image:Valve_Drawing_ColRegen.png|frame|Plumbing diagram showing flow for each selected column]]	+
-		+
-		+
-		+
-	[[Image:key_Benefits2.png‎]]	+
-		+
-		+
-		+
-	[[Image:Restrictions.png‎]]	+

---

Current revision

	LC Column Switching & Regeneration
	Application Type
	SPECIAL
	Application ID
	M-001
	Description
	LC Column Switching & Regeneration.

Sorry for any inconvenience

Please see http://www.leapwiki.com/mediawiki/index.php?title=M-001_Dual_Channel_Serial_Injection_-_Analyst_with_ICC-CE