LC Column Switching and Regeneration

From LEAP

Revision as of 15:12, 4 February 2009 (view source) Psmith (Talk | contribs) ← Older edit		Revision as of 15:13, 4 February 2009 (view source) Psmith (Talk | contribs) Newer edit →
Line 16:		Line 16:
	[[Image:Valve_Drawing_ColRegen.png]]		[[Image:Valve_Drawing_ColRegen.png]]
		+
		+	[[Image:y_Benefits2.png‎]]

---

Revision as of 15:13, 4 February 2009

	LC Column Switching & Regeneration
	Application Type
	High Throughput
	Application ID
	LC1001
	Description
	LC Column Switching & Regeneration.

Overview

This configuration allows the regeneration of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput.

There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.

Image:Y Benefits2.png