Dispensing precise and fast samples

From LEAP

Revision as of 19:03, 23 April 2009 (view source) Bpeat (Talk | contribs) (New page: A PAL is used to perform precise and rapid loading of 1 ul volumes onto a customer material for off line analysis. Over a hundred customer target material is loaded on to 2 trays. 1 ul o...) ← Older edit		Current revision (14:18, 5 November 2009) (view source) Bpeat (Talk | contribs)
(4 intermediate revisions not shown.)
Line 1:		Line 1:
-	A  PAL is used to perform precise and rapid loading of 1 ul volumes onto a customer material for off line analysis. Over a hundred customer target material is loaded on to 2 trays.	+	'''Sorry for any inconvenience '''
-	1 ul of solvent is delivered at high precision using a pump and a side port syringe to each target approximately every 10 seconds.	+	Please see http://www.leapwiki.com/mediawiki/index.php?title=Rapid_Precision_Dispensing
-		+
-	LEAP Shell software allows control of each tray to allow one to be loaded/ unloaded while the other is in process or complete walk away sample processing of both trays.	+
-		+
-		+
-		+
-		+
-	[[Image:Total_Iodine_PAL.png]]	+
-		+
-		+
-	'''Project Ref: LS-C1001'''	+
-		+
-	----	+
-	=== Contact LEAP ===	+
-		+
-	* [http://www.leaptec.com/contact-us.php Contact the LEAP office]	+

---

Current revision

Sorry for any inconvenience

Please see http://www.leapwiki.com/mediawiki/index.php?title=Rapid_Precision_Dispensing