Analysis of Total Iodine

From LEAP

Revision as of 14:02, 25 March 2009 (view source) Psmith (Talk | contribs) (New page: A COMBI PAL will be used to mix samples with water, oxidizing hypochlorite and ascorbic acid. Followed by injection to HPLC After the addition of each reagent to the sample reagent matrix...) ← Older edit		Revision as of 20:23, 26 March 2009 (view source) Psmith (Talk | contribs) Newer edit →
Line 4:		Line 4:
-	'''Project Ref: LS-C1002'''	+	[[Image:Total_Iodine_PAL.png]]
		+
		+
		+	'''Project Ref: LS-C1001'''

---

Revision as of 20:23, 26 March 2009

A COMBI PAL will be used to mix samples with water, oxidizing hypochlorite and ascorbic acid. Followed by injection to HPLC

After the addition of each reagent to the sample reagent matrix, the 2 ml sample vial will be agitated and heated for a period of time specified by the operator. Once all three reagents have been added to the original sample and each of the agitation periods have been completed, the 2ml sample vial will be transported from the agitator to its original position in the VT-98 destination tray. Then 20ul to 100ul of the sample reagent matrix will be withdrawn from the 2ml sample vial and injected into the 6-port Cheminert valve.

Project Ref: LS-C1001