Analysis of Total Iodine

From LEAP

(Difference between revisions)
Jump to: navigation, search
Line 9: Line 9:
'''Project Ref: LS-C1001'''
'''Project Ref: LS-C1001'''
-
 
+
----
=== Contact LEAP ===
=== Contact LEAP ===
* [http://www.leaptec.com/contact-us.php Contact the LEAP office]
* [http://www.leaptec.com/contact-us.php Contact the LEAP office]

Revision as of 18:57, 23 April 2009

A COMBI PAL will be used to mix samples with water, oxidizing hypochlorite and ascorbic acid. Followed by injection to HPLC

After the addition of each reagent to the sample reagent matrix, the 2 ml sample vial will be agitated and heated for a period of time specified by the operator. Once all three reagents have been added to the original sample and each of the agitation periods have been completed, the 2ml sample vial will be transported from the agitator to its original position in the VT-98 destination tray. Then 20ul to 100ul of the sample reagent matrix will be withdrawn from the 2ml sample vial and injected into the 6-port Cheminert valve.


Image:Total_Iodine_PAL.png


Project Ref: LS-C1001


Contact LEAP

Personal tools